Cool Staff enhancement
I found that if you put a length of 3/8 clear acrylic tube down the glow staff, the output along the shaft doubles. The tube must but up against the end of the staff.
Another effect: if you take the acrylic tube and cut it into short segments before putting it into the shaft, there's an intense light at each joint.
Another effect: if you take the acrylic tube and cut it into short segments before putting it into the shaft, there's an intense light at each joint.
Replies to This Discussion
-
Permalink Reply by Fire Mecca on -
This sounds like a really great way to also add weight to the staff. Thanks for the tip!
About
© 2009 Created by Fire Mecca on Ning. Create a Ning Network!
